A light appears in the dark
Product.Nr. 22520
€ 79,50*
Safety transformer,
manufactured in Germany, in accordance with DIN EN61558-2-6.
For use in dry rooms only.
Transformer is completely moulded into the plastic housing.
Protected on the input side by a current-sensitive temperature switch 110°C, with self-holding function (combined protection against overtemperature and overcurrent).
Connected loads:
Primary: 230 V~, 50/60 Hz
Secondary: 12 V~ / 8.9 A
Power: 105 VA, with overtemperature switch
Connection:
Input:
Flat cable 2x 0.75mm², 1.40 m long, with Euro flat plug.
Output:
Round cable 2x 1.5mm², white, 0.5 m long, ends stripped.
Dimensions (WxHxD):
108 x 74 x 77 mm
Weight: 2.6 kg
Note:
The transformer is suitable for max. 140 light bulbs or 14 soffit strips (indirect lighting # 20600 = 2 soffit strips / pack).
If the transformer overheats (overloads), the built-in thermal switch briefly switches the transformer off to protect the system.
IMPORTANT: The temperature switch does NOT reset itself after a fault. This is for safety reasons to prevent unintentional restarting. To reset the built-in temperature switch, the transformer must be completely disconnected from the power supply for a few minutes.
Currently not available.
to article
Plug-in transformer with connector strip
Product.Nr. 22600
€ 52,50*
Plug-in transformer with 12 socket connector strip
12 Volt~ / 2 A (230 V~ primary)
Note
The small plug-in transformer is for a max. of 30 incandescent lamps and comes complete with a 12 socket connector strip.
The transformer is plugged directly into the socket outlet and has a 2.5 m connection cable on the 12V outlet for connecting the supplied connector strip.
to article
Product.Nr. 22610
€ 39,50*
Connected loads:
12 Volt= / 2 A, (230 V~ primary), suitable for a max. of 30 incandescent lamps.
The transformer is plugged directly into the socket and has a 90 cm long 2-core cable with luster terminal at the 12V output for connection to the distribution plate (# 22300) or to our socket strips.
You can use the 2-wire cable (# 22200) to extend the 90 cm long connection cable.
to article
Radio-controlled sockets with remote control
Product.Nr. 22650
€ 24,90*
Voltage: 220-240 V~, 50 Hz
to article
Instructions - Electrical installation
Product.Nr. 23000
€ 1,20*
to article
Instructions - Electrical installation - ENGLISH
Product.Nr. 23001
€ 1,20*
Instructions - Electrical installation (English)
to article
Instructions - Electrical installation - DUTCH
Product.Nr. 23004
€ 1,20*
Instructions - Electrical installation (DUTCH)
to article
CR1632 Lithium battery, 4 pieces
Product.Nr. 26300
€ 8,40*
CR1632 lithium batteries (button cells) for MiniLux LED battery lamps
Scope of delivery:
4 lithium batteries of type CR1632
- Type: CR 1632 button battery
- Voltage: 3V
- Capacity: 120 mAh
- Technology: Lithium manganese dioxide
- Dimensions: Ø 16mm, height 3.2 mm
to article
Product.Nr. 70080
€ 5,60*
Photo shows item no. # 70080, # 70090.
Hint:
In addition to the ceiling rosettes, we recommend our lamp canopy (# 21900) with screw thread, which then replaces the simple lamp canopy of the MiniLux lamps. This allows the lamps to be easily and securely attached to the rosettes.
to article
Product.Nr. 70090
€ 5,80*
Photo shows item no. # 70080, # 70090.
Hint:
In addition to the ceiling rosettes, we recommend our lamp canopy (# 21900) with screw thread, which then replaces the simple lamp canopy of the MiniLux lamps. This allows the lamps to be easily and securely attached to the rosettes.
to article
Fast Order [more]
Complete set – Biedermeier dining room, incl. accessories
Product.Nr. 40400
€ 158,00 -15% RRP € 185,90 *
Furniture construction set - Café and confectionery
Product.Nr. 40950
€ 87,05 -15% RRP € 102,40 *
